|
E200 Series: Electric Level Control Switches
CSA Inspection Certificate
|
P120 Series: Snap Acting Non-Bleed Pneumatic Level Controls
|
- Float-actuated switches for high/low level control and interface control
- Working Pressure – 1500 psig to 5000 psig max
- Low specific gravity .4 and above
- 316 SS wetted components
- Hermetically sealed switch cartridge
- Single seal application approved
- 1 1/2" NPT, 2” NPT or flanged connection
- Certification – CSA: Class 1, Div. 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III, Div. 1 to USA & Canada standards
|
- Float-actuated pneumatic switch for high/low level control or to operate control valves
- Working Pressure – 1500 psig to 5000 psig max
- Snap acting non-bleed from 0 to full supply
- Low specific gravity .5 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT standard, available 1 1/2“ NPT or flanged connection
|
|
E200 Series – Manual Override Electric Level Control Switches
|
P120 Series – Manual Override Snap Acting Non-Bleed Pneumatic Level Controls
|
- E200 control with manual override for ease of field testing
- Working Pressure – 1500 psig max
- Low specific gravity .4 and above
- 316 SS wetted components
- Hermetically sealed switch cartridge
- Single seal application approved
- 1 1/2" NPT, 2” NPT or flanged connection
- Certification – CSA: Class 1, Div. 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III, Div. 1 to USA & Canada standards
|
- P120 control with manual override for ease of field testing
- Working Pressure – 1500 psig max
- Snap acting non-bleed from 0 to full supply
- Low specific gravity .5 and above
- 316 SS wetted components
- 2” NPT or flanged connection
|
|
E200 Series – Extended Body Electric Level Control Switches
|
P120 Series – Extended Body Snap Acting Non-Bleed Pneumatic Level Controls
|
- E200 control with extended body for increased reach inside vessel
- Working Pressure – 5000 psig max; 1500 psig with manual override
- Low specific gravity of .5 and above
- 316 SS wetted components
- Hermetically sealed switch cartridge
- Single seal application approved
- 2” NPT or flanged connection
- Certification – CSA: Class 1, Div. 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III, Div. 1 to USA & Canada standards
|
- P120 control with extended body for increased reach inside vessel
- Working Pressure –5000 psig max; 1500 psig with manual override
- Snap acting non-bleed from 0 to full supply
- Low specific gravity .5 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT or flanged connection
|
|
E200NF Series: Electric Flow Indicator
|
P120NF Series: Pneumatic Flow Indicator
|
- Paddle operated electric indicator of liquid or gas flow
- Working Pressure – 5000 psig max
- Variety of paddle lengths
- 316 SS wetted components
- Hermetically sealed switch cartridge
- Single seal application approved
- 1 1/2" NPT, 2” NPT or flanged connection
- Certification – CSA: Class 1, Div. 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III, Div. 1 to USA & Canada standards
|
- Pneumatic paddle operated indicator of liquid or gas flow or no flow
- Working Pressure – 5000 psig max
- Variety of paddle lengths
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT standard, available 1 1/2" NPT or flanged connection
|
|
EV200 Series: Electric Vertical Level Control Switches
|
PT100 Series: Throttling Pneumatic Level Controls
|
- Float-actuated vertical switch for high/low level controls
- Working Pressure – 250 psig max
- Low specific gravity .7 and above
- 316 SS wetted components
- Hermetically sealed switch cartridge
- Single seal application approved
- 1 1/2" NPT, 2” NPT or flanged connection
- Certification – CSA: Class 1, Div. 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III, Div. 1 to USA & Canada standards
|
- Float actuated throttling pneumatic level device for high/low level control or to operate control valves
- Working Pressure – 1500 psig to 5000 psig max
- Throttling output 3 – 15 psig with 20 psig supply
- Low specific gravity of .4 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT or flanged connection
|
|
C300 Series: External Cage for Level Controls
|
C303 Series: External Cage for Level Controls
|
- Use in applications where level controls are contained outside the vessel
- Working Pressure 5000 psig max (3000 psig on ring bolted)
- Choice of materials for use with most liquids or liquid interfaces
- Ductile iron – C300
- Carbon steel – C300CS
- Stainless steel – C300SS
- Control connections 1 1/2“ NPT, 2” NPT or ring bolt flange
- Process connections 1” NPT, 1 1/2” NPT, 2” NPT; socket weld connections of 1”, 1 1/2" and 2” on the C300CS and C300SS
- S100 sight glass available for visual inspection
|
- Use in applications where level controls are contained outside the vessel
- Working Pressure 2500 psig max
- Choice of materials for use with most liquids or liquid interfaces
- Carbon steel – C303CS
- Stainless steel – C303SS
- Control connections 1 1/2“ NPT, 2” NPT or ring bolt flange
- Process connections 1” NPT, 1 1/2” NPT, 2” NPT; socket weld connections 1”, 1 1/2", 2”
- S100 sight glass available for visual inspection
|
|
S100 Series: Sight Glass
|
P110 Series: Snap Acting Pneumatic Level Controls
|
- Provides visual indication on level controls or safety systems
- Use with Pathway C300 and C303 Series external cages
|
- Float-actuated pneumatic switch for high/low level control or to operate control valves
- Working Pressure – 1500 psig to 5000 psig max
- Snap acting from 0 to full supply
- Low specific gravity .4 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT or flanged connection
|
|
PT101 Series – Extended Body Throttling Pneumatic Level Controls
|
P111 Series: Snap Acting Pneumatic Level Controls
|
- PT100 control with extended body for increased reach inside vessel
- Working Pressure – 1500 psig to 2500 psig max
- Throttling output 3 – 15 psig with 20 psig supply
- Low specific gravity of .4 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT or flanged connection
|
- P110 control with extended body for increased reach inside vessel
- Working Pressure – 1500 psig to 2500 psig max
- Snap acting from 0 to full supply
- Low specific gravity .4 and above
- 316 SS wetted components
- No internal seal used thus eliminating the possibility of process fluid leakage
- 2” NPT or flanged connection
|
|
6100 Series: Static Head Pressure Switches & Vapor Pressure Switches
|
22262 Cuttler Road • New Caney, TX 77357
Phone (281) 354-3699 • Fax: (281) 354-4475
|
- Use on atmospheric pressure vessels
- Adjustable pressure and level ranges
- Electric pressure actuated switch for controlling vapor pressure or liquid level controls
|
|
